The professionally sanded and grouted subsurface must be clean and dry, free of oil, wax and dust.
Shake up strato classic prime 200 well, apply evenly with the Aquatop-Roller. A light topping sand-off with abrasive mesh 120 is possible before further sealing, and improves the surface result.
In an optional 2K-application, add Cross-linker M to strato classic prime 200 and mix well. Roll out the mixture as above. It is not possible to carry out a topping sand-off.
Room and material temperature must not be allowed to fall below +15°C during application and drying time. The rules of the professional trade are to be observed.
approx. 120-150 ml/m² (7-8 m²/l). For best results and an even surface image, work in thick layers. In the case of highly absorbing subsurface increased consumption is possible, depending on the absorbency of the wood.
For the sake of the wood and the avoidance of excessive swelling, only one rolled coat of water-based lacquer per day is recommended. The product itself can be carefully walked on, or worked on again, after about 3 hours (at 20 °C and 50% relative humidity).
Low temperatures, increased humidity and poor ventilation can extend the drying time substantially.