Strato Amber Prime 203
Shake up strato amber prime 203 well, apply evenly and generously with the Aquatop-Roller onto the finely sanded floor. If a stronger coloration is desired, a second coat is possible, whereby an interim sanding is recommended with 180 grain as a top sanding, not sanded right down. Finally apply two coats of strato lacquer.
Can be walked on carefully and worked on again after approx. 3 hours (at 20 °C, 50% relative humidity and air movement).
approx. 120-150 ml/m² per coat (7-8 m²/l).
– The subsurface must be professionally sanded and grouted before application and must be clean and dry, free of oil, wax and dust. We recommend fine sanding with 120 grit.
– Tip: wet mopping of the raw wood with a short drying interval until it appears dry, reduces the absorbency of the wood when the waterbased lacquer is applied and make the coloration more uniform.
– Wood which has largely been dried from below (e.g. in renovation sanding on an under-heated floor) should be wet mopped before lacquering, in order to avoid color marks in the process.
– Room and material temperature must not fall below +15°C during application and drying time.