Eukula Wood Oil Refresher
Thoroughly clean the floor to be treated with a damp mop/cloth. Apply euku refresher with a cloth onto the floor. After allowing it to soak in for about 5-10 minutes, polish out the remaining excess. No liquid oil should remain on the surface.
- The optimal way to apply the refresher is with a T-Wiper and cloth-strip
- To polish out large areas we recommend using a monodisc machine.
Depending on the absorbency of the subsurface. Guideline: approx. 30-50 ml/m² (range: 20-30 m²/l).
In the case of coarse sanding, larger joints and highly absorbent wood, higher consumption is possible, but subsequent coats consume significantly less.
Can be walked on carefully, or worked on again after about 16 hours (at 23 °C and 50% relative humidity, air movement, oak). The area should not be wet-cleaned in the first 7 days. After 10 days at the earliest, carpets can be laid on the floor.
Low temperatures, increased air humidity, poor ventilation and retarding substances contained in the wood can have a sustained delaying effect on the drying time.